Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Stallings
If your fireplace is pushing smoke into the room, your crown is cracked, or you’ve never had the flue looked at since you bought the house, we handle chimney repair in Stallings with the same crew that sweeps it. We know this town’s housing, and we know what tends to go wrong in it. Most of the repair work here happens in subdivisions built between the 1990s and the 2010s, which means prefab fireplaces, stainless flue liners, and builder-grade chase covers rather than century-old brick stacks. That changes the diagnosis and the tools we bring. Call (888) 495-1677 to book an estimate.
Why Stallings Homeowners Call Chimney Sweep Ballantyne for Chimney Repair
Stallings sits in Union County, just south of Charlotte, and the chimney failures we see here don’t look like the ones inside the city’s historic neighborhoods. They look like a 2004 prefab insert with an open chase top, a rusted flue section, and a homeowner who’s owned the house five years and never had it inspected. We work on that kind of system every week, and we diagnose it in context: the sweep, the inspection, the cap, the flashing, and the liner get looked at together because they fail together.
Our technicians have up to 13 years of experience, and our reviews from local homeowners reflect how we work: we show you the camera footage before we recommend anything, and we tell you plainly when a repair can wait. We’re a chimney-only operation, so there’s no juggling a mason for one scope and a sweep for another. One call covers the inspection, the repair, and the cap.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Stallings
We handle the full range of chimney repair, from a single repointed joint to a crown rebuild. The four services Stallings homeowners ask for most:
Mortar Repointing
Repointing is the repair of the mortar joints between bricks, done by grinding out the failed mortar and packing new material in behind it. On the older farmhouses and rural-era homes scattered around Stallings, weather and freeze-thaw cycles have often eroded joints several courses deep. Repointing restores the bond and stops the brick from coming loose.
Spalling Brick Repair
Spalling is the flaking and popping of the brick face itself, usually after water has soaked in and frozen behind the surface. Once a brick spalls, it can’t be glued back together; the damaged units get cut out and replaced with matching brick, then the whole face gets sealed against further water. We see this most often on chimney shoulders and crowns that have gone years without waterproofing.
Chimney Waterproofing
A breathable waterproofing treatment keeps liquid water out while letting moisture vapor escape, which is what masonry needs to stay sound. We apply it after any mortar or brick repair is finished, so the surface being sealed is in good condition. Around Stallings, where a Piedmont ice storm can crack a crown and let water run down a chase, waterproofing is often the cheapest thing a homeowner can do to prevent an expensive liner repair later.
Flashing Repair
Flashing is the metal that seals the joint where the chimney meets the roof, and when it loosens or pulls away, water finds its way into the attic and the chase with no obvious sign from inside the house. We reset or replace flashing with the proper counterflashing and seal it with manufacturer-matched products. For a Stallings homeowner, flashing repair is often the fix that gets deferred the longest, because the damage is up on the roof where nobody looks.
Trusted Brands We Service in Stallings
We install and work on the same professional-grade products certified chimney contractors rely on, including Gelco, Olympia Chimney, Famco, and Copperfield. That matters here because Stallings prefab systems use specific cap and crown components, and a mismatched cap leaves gaps that let in water and wildlife. We use these brands because they’re what the trade actually uses, not what’s cheapest at the hardware store. When a repair calls for a replacement part, we source the correct one for your system and quote it in the written estimate before any work starts. No parts are stocked on a truck or in a warehouse; we order what the job needs.
Common Chimney Repair Problems We See in Stallings Homes
- Hard, glazed creosote from intermittent burning. Stallings winters are mild and short, so many homes burn wood only during cold snaps, and that stop-and-start pattern builds third-degree glaze that a brush alone won’t remove. It goes unseen until a Level 2 inspection camera finds it, which is why an inspection matters as much as the sweep.
- Open chase tops and missing caps on builder-grade flues. Much of Stallings was farmland before it was subdivided, and a lot of the newer homes went up without a chimney cap. Spring brings bird nests and squirrels into those open flues, and the first sign is usually poor draft or smoke spilling into the room on the next fire.
- Ice-damaged crowns and loose flashing. A Piedmont ice event can crack a builder-grade crown and work flashing loose, letting water track down the chase and rust the stainless liner long before anyone notices the spalling. Inspecting the crown and the flashing after a hard freeze is worth the appointment.
- Deferred small fixes on rural-edged properties. On the properties at Stallings’ edges where the lots are larger and drives are longer, small gasket and flashing issues tend to wait. What starts as a minor leak can turn into a full liner replacement by the time it’s caught.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Stallings, NC
Every job is priced per job by a written estimate, and the estimate is free. These ranges are typical for the Stallings area:
- Mortar repointing: usually $300 to $900, depending on how many joints and how accessible the chimney is.
- Spalling brick repair: typically $400 to $1,200, based on the number of bricks replaced and whether scaffolding is needed.
- Chimney waterproofing: roughly $250 to $600 for a standard masonry chimney.
- Flashing repair: around $300 to $800, depending on whether the existing flashing can be reset or must be replaced.
- Chimney rebuilding (upper stack or crown): generally $1,500 to $5,000 or more for a full rebuild, quoted after inspection.
The written estimate sets the final price, so the numbers you see are the numbers you pay. Nothing gets recommended without camera evidence you can look at yourself.
Do You Service Gelco, HeatShield or DuraFlex Liner Systems in Stallings Prefab Fireplaces?
Yes. We service prefab and metal-flue systems in Stallings, including factory-built fireplaces and stainless liners, and we work with Gelco, HeatShield and DuraFlex products in those systems.
We Also Serve Cities Near Stallings
Stallings sits close to several towns we cover just as thoroughly: Weddington, Wesley Chapel, Matthews, and Providence. If you’re on the edge of Stallings or just over the line in a neighboring town, the same crew handles it, and the same inspection-first approach applies. We’re familiar with the housing and the weather across this part of Union County.
Serving Stallings, NC – Our Local Coverage Area
We serve Stallings and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Stallings
Dispatch runs from 7am to 7pm, Sunday through Friday, and we answer the phone 24/7. A call outside dispatch hours gets booked into the next opening. Most Stallings appointments are scheduled within a few days of your call.
Yes, we cover all of Stallings, including the subdivisions off the main Union County corridors and the rural-edged properties where the lots are larger. Tell us your address when you call and we’ll confirm the details. Call (888) 495-1677.
Same-day service is sometimes possible when a booking opens, but we set appointments per job rather than promising same-day across the board. The written estimate always comes before any work, so you know the price first.
Not usually. Our Stallings pricing tracks the surrounding Union County and Charlotte-area market, and the written estimate sets the final price. The cost depends on the scope and the access, not the town line.
Warranty terms depend on the repair and the products used, and we spell them out in writing before the work begins. Ask about the specific coverage for your job when we quote it.
If your Stallings home has an open chase top, a cracked crown, or a flue that hasn’t been inspected in years, we can get it looked at and quoted. Call (888) 495-1677 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Ballantyne.