Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Beverly Woods
If your Beverly Woods chimney crown is cracked or your cap is packed with debris, the fix is straightforward: we inspect it, tell you what the camera shows, and install or restore a correctly fitted cap and crown. Beverly Woods sits in a stretch of Charlotte where the housing is dense and the trees are taller than the rooflines. That matters for cap and crown work. A cap that fits one stack properly on a standalone lot can be the wrong answer on an attached property where two flues share a chimney. We work with homeowners all through the neighborhood, from the brick ranches off Runnymede to the split-levels along the wooded streets near Beverly Woods Elementary, and we know what the oak canopy does to a chimney screen over one humid summer. Call (888) 495-1677 to set up a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Beverly Woods Homeowners Call Chimney Sweep Ballantyne for Chimney Cap & Crown
Chimney work in Beverly Woods rewards someone who looks at the whole chimney rather than just the box on top. Our technicians have up to 13 years of experience, and that time is spent on chimneys full time, not as one line item on a handyman’s list. When we pull a cap and see the crown beneath it, we read the mortar and the flue tile in context. A sweep who only cleans can’t do that evaluation, and a roofer can’t either. A chimney sweep is only as good as the inspection that comes with it, and we look while we clean.
We use Gelco and Famco products for cap and crown work because they’re what professional chimney technicians rely on, not what’s cheapest at the hardware store. Manufacturer-matched materials mean a verified fit and real weatherproofing instead of a bead of caulk and hope. The local pro is licensed and insured as the state requires. Every job starts with a free written estimate, and nothing gets recommended that you can’t see for yourself on the inspection camera.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Beverly Woods
Cap and crown work on Beverly Woods homes is rarely just one task. The cap sits on the crown, the crown sits on the flue, and all three take the same weather. Here’s how we handle each part.
Cap Installation
A properly sized cap keeps out rain, leaves and the animals that treat an open flue as a den. In Beverly Woods, the heavy oak canopy means debris load far above what an open lot sees, so we size the screen to handle it and set it so it can be cleaned without pulling the whole assembly. For shared stacks, the cap has to cover every flue opening, not just yours.

Cap Replacement
Original caps on 1950s to 1970s homes here have usually outlived their screens twice over. Rusted mesh, a cap bent by a fallen limb, a cap sized for the wrong flue tile: all common. We pull the old one, check the crown and flue beneath it, then fit a replacement that matches the actual opening.

Crown Repair
Clay crowns crack and spall after decades of humid Piedmont summers, and a cracked crown lets water straight down to the flue and the mortar around it. On a shared or adjacent stack that water damage can work its way into the adjoining flue. We rebuild failed crowns with a proper overhang so runoff leaves the chimney instead of soaking back into it.

Crown Coating
Not every crown needs tearing out. If the masonry is sound and the wear is surface-level, a coating from a professional-grade product like HeatShield or a Famco crown coating seals it and buys years before a rebuild. We only recommend coating when the crown passes inspection.
Trusted Brands We Service in Beverly Woods
We work with an intentional roster of professional-grade brands: Famco and Gelco for caps and crown work, DuraFlex flexible stainless liner systems, HeatShield ceramic liner resurfacing, Olympia Chimney, and Copperfield. The point of naming them is simple. These are the materials certified chimney specialists across the country rely on, and they fit the aging clay-tile flues common in Beverly Woods. We don’t claim to stock parts locally. We source the right product for your flue and install it correctly, and because the cap and crown crew and the liner crew are the same technicians, there’s no handoff to a subcontractor and no gap in accountability. One call covers it: sweep, inspect, repair, cap.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Beverly Woods Homes
These are the failures that come up again and again on this neighborhood’s brick ranches and split-levels.
- Oak debris packing the cap and screen. Beverly Woods sits under a mature oak canopy that sheds leaves, tassels and seed onto every roof in the neighborhood. When that debris packs into the mesh, the flue can’t draft, and a dormant summer chimney starts to smell.
- Original clay crowns cracking and spalling. The humid summers here soften and crack old crowns, and water reaches the flue and mortar above a shared or adjacent stack. A crown that looks fine from the ground can be weeping rain into the chimney.
- A single-flue cap on one side of a shared stack. When one flue on a shared chimney is capped and the other isn’t, a neighbor’s appliance is free to vent exhaust or wood smoke back into the adjoining flue. It’s an odor problem a standalone house never has to solve.
- Debris and humidity rusting the damper. Long idle stretches between fires let moisture sit in the stack, and the damper and its frame rust while the mortar above softens. Spring inspections catch it before the fall burn season.
Pricing for Chimney Cap & Crown in Beverly Woods, NC
Cap and crown pricing depends on how many flues the cap covers, whether the crown needs coating or a full rebuild, and how accessible the roofline is. Here are typical ranges for Beverly Woods:
- Single-flue cap installation: $175 to $375
- Multi-flue cap for a shared stack: $325 to $650
- Custom or large multi-flue cap: $450 to $900
- Crown coating (surface wear only): $275 to $525
- Crown rebuild: $550 to $1,200
These are estimates for a typical job. The written estimate you get after the inspection sets the final price, and there’s no fee for that estimate. Fast dispatch from 7am to 7pm, Sunday through Friday, so we can see the roof while it’s dry.
We Also Serve Cities Near Beverly Woods
We work in Beverly Woods and the neighborhoods around it, including Quail Hollow, Providence, Ballantyne, and Marvin. If you’re on the edge of the neighborhood or just over the line into one of these, the same cap and crown team can take care of it. Call (888) 495-1677 to confirm we cover your street.
Serving Beverly Woods, NC – Our Local Coverage Area
We serve Beverly Woods and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Beverly Woods
Because the oak canopy sheds debris into the cap and flue while the chimney sits idle in humid weather, and trapped moisture and leaf litter create that sour odor. Late-summer and early-fall calls spike on exactly this: debris-packed screens and dormant flues. Call (888) 495-1677 and we’ll inspect and clear it.
Yes. In Beverly Woods’ attached and closely-built properties, a shared stack with one flue left uncapped lets a neighbor’s wood smoke or insert exhaust vent back through your firebox. The fix is a properly fitted multi-flue cap that seals every opening on the stack. Call (888) 495-1677 for a free estimate.
Very likely. Inserts need their own liner and a clearance check, and many were fitted without a modern one. Our technicians inspect with a camera and can recommend a DuraFlex flexible liner or HeatShield restoration without a full reliner if the flue qualifies. Call (888) 495-1677 to get it checked.
You can’t tell from the ground – a cracked or spalling crown looks fine from below. We check the masonry at the flue and recommend coating only when the crown is structurally sound; otherwise it’s a rebuild. Call (888) 495-1677 and we’ll show you on camera.
Spring, before the fall burn season, so problems surface before the first fire and your roof is dry for inspection. Late summer works too if you’re already noticing that sour odor. Call (888) 495-1677 for a free estimate and we’ll book a time that works for you.
Written by the team at Chimney Sweep Ballantyne.