Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Matthews
If your fireplace is smoking, your damper won’t close, or you’ve inherited an old masonry chimney you don’t quite trust, we handle the repair. We work on wood-burning fireplaces, gas units, inserts, dampers, and fireboxes in Matthews, and we look at the whole chimney system rather than just the part that’s bothering you. Attached and closely spaced homes are common here, and that changes how a repair has to be done.
Our technicians have up to 13 years of experience, and they know the difference between a 1920s mill-town firebox near the historic downtown core and a factory-built insert in a 1990s subdivision off McKee Road. Call (888) 495-1677 to book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Matthews Homeowners Call Chimney Sweep Ballantyne for Fireplace Repair
We serve homeowners throughout Matthews, and the calls here don’t look like the calls in newer suburbs. A fireplace repair in Matthews often means sorting out why a chimney that sat idle all summer now pours smoke into the room, or why a neighbor’s appliance seems to be venting into a shared stack. We treat your fireplace as a system: flue, damper, firebox, crown, and cap all get checked, because a repair that fixes the firebox while ignoring a cracked crown will be back.
We show you what we find. A camera inspection and photo report come with the work, so you’re not taking our word for it when we say a damper is rusted or a liner is spalling. Nothing gets recommended without evidence you can see. When a repair can safely wait, we tell you that too.
We run the full chimney lifecycle under one roof, from the annual sweep to structural fireplace repair, using HeatShield ceramic liner resurfacing and DuraFlex flexible stainless liner systems where the flue calls for them. That means one call covers it: sweep, inspect, repair, cap. No juggling contractors, no one-hand-off-to-another for different scopes.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Matthews
Wood Burning Fireplace Repair
Wood-burning fireplaces are where Matthews’s older housing stock shows its age. The masonry fireboxes in the early- and mid-century homes near downtown were built to a different set of assumptions than today’s codes, and a firebox that’s spalled, cracked, or missing mortar joints won’t hold heat or draft properly. We rebuild fireboxes with refractory mortar, repair smoke chambers, and check the flue liner for the spalling that comes with years of sporadic burning.

Damper Repair
A damper that sticks open or won’t seal is one of the most common repair calls in this town, largely because a chimney that sits unused through humid Piedmont summers rusts the damper in place. We free, repair, or replace dampers so the flue closes tight between fires and stays open when it should. If the damper is rusted through, we’ll show you the photo before recommending replacement.

Firebox Repair
Cracked firebox brick and crumbling mortar joints let heat reach materials that weren’t meant for it, and that’s a real risk, not a cosmetic one. We repair and rebuild fireboxes with refractory materials matched to the unit. On the old downtown Matthews chimneys that predate modern flue codes, firebox work often goes hand in hand with a crown and mortar repair, since the same freeze-thaw cycles that crack the firebox crack the crown too.

Fireplace Insert Service
Many of the 1990s and 2010s brick-front homes along Weddington-Matthews and Idlewild corridors have factory-built metal fireboxes or vented gas log sets, and inserts in those units fail in their own way: gaskets wear, glass clouds, and the flue connection loosens. We service inserts, check the venting, and confirm the unit is isolated from any shared stack it sits near.
Alongside those, we also handle gas fireplace repair and pilot light repair for the vented gas log sets common in newer Matthews subdivisions. Gas lines are not a place for trial and error, so we treat any fuel-side issue as one for a trained technician and confirm the connection is sound before we call a job finished.
Trusted Brands We Service in Matthews
We supply and install professional-grade chimney materials, the kind certified specialists rely on rather than what’s cheapest at the hardware store. That includes DuraFlex flexible stainless liner systems for older or offset flues that rigid liners can’t navigate, HeatShield ceramic liner resurfacing to extend a liner’s life without a full reliner, and Gelco and Famco products for cap and crown work matched to the unit for a verified fit. We don’t keep parts on hand for every fireplace, so a repair may need a part ordered to match your unit; we’ll tell you the turnaround up front and confirm it before we schedule the work.
Common Fireplace Repair Problems We See in Matthews Homes
The troubleshooting here isn’t generic, because Matthews straddles two housing worlds. A repair that’s right for a pre-war masonry chimney isn’t right for a prefab insert, and the reverse holds too.
- Shared and adjacent flues in attached homes. In the older downtown and mill-town core and in several 1990s townhome clusters, multiple appliances vent into a shared masonry stack. When a neighbor’s gas logs or furnace vent into the same stack, smoke and odor can back-draft into a fireplace that was never properly isolated. Any repair here has to account for the neighbor’s flue, not just yours.
- Dormant creosote that glazes on the first cold snap. Because many Matthews residents burn only a handful of fires a year, first-degree creosote sits for months. A single hard cold snap can glaze it into second- or third-degree creosote, which turns a simple sweep into a liner replacement call.
- Freeze-thaw damage to crowns and mortar joints. Piedmont winters bring occasional hard freezes and ice storms, and those cycles crack the chimney crown and mortar joints on older masonry chimneys. Water gets in, dampers rust, and the smoke chamber erodes.
- Nests and downdrafts in chimneys that sat unused. A bird, squirrel, or raccoon nest in an uncapped flue, or a rusted-open damper, is one of the most common reasons a Matthews fireplace smokes on the first cold morning. The flue cap is usually the fix, but the flue needs a look first.
See the difference
Before
After
Before
After
Before
AfterWhy Shared Flues Make Matthews Fireplace Repair Different
This is the part that catches people off guard, and it’s why we go deeper than the firebox on attached homes. In Matthews, a meaningful share of properties sit in attached or closely spaced arrangements: the older core near the historic downtown and Matthews Station, plus several townhome clusters built in the 1990s and 2000s. In those, two or more appliances can vent into one shared masonry stack. A fireplace repair that ignores the neighbor’s flue can push carbon monoxide or smoke back into the wrong unit. Carbon monoxide is colorless and odorless, and a back-drafting flue won’t announce itself. Before we touch a damper or rebuild a firebox in a shared stack, we map which appliances vent where and confirm your fireplace is isolated from the neighbor’s gas logs or furnace. On properties like this, the repair is only finished once a smoke test confirms draft and we know nothing is being pushed next door.
After that, the usual story sounds familiar to most Matthews homeowners. A fireplace sits unused through the humid summer, pulls a downdraft on the first cold snap, and fills the room with smoke because a nest has blocked the flue cap or the damper rusted open. The cause is usually sporadic use combined with freeze-thaw cycles that crack the crown and mortar joints and let in moisture and debris. A qualified local pro typically runs a Level 2 inspection, clears the nest or debris, checks the liner for spalling, then either repairs the damper or rebuilds the firebox with refractory mortar and confirms draft with a smoke test before the job is done.
Pricing for Fireplace Repair in Matthews, NC
These are typical ranges for the Matthews market, and the written estimate sets the final price. A standard sweep in Matthews runs $150 – $250. A Level 2 camera inspection runs $200 – $400 on its own and is often bundled with the sweep. Damper repair or replacement runs $200 – $450. Firebox repair with refractory mortar runs $400 – $1,200 depending on how much brick needs rebuilding. Gas fireplace or pilot light repair runs $150 – $350. A cap and crown repair on older masonry runs $300 – $900. HeatShield liner resurfacing runs $1,200 – $2,500, and a full DuraFlex reliner runs $2,500 – $5,500. Freeze-thaw damage and shared-flue complications are the two biggest cost drivers here. Estimates are free, and we’ll tell you when work can safely wait. Our fireplace repair team handles the full job.
We Also Serve Cities Near Matthews
Our service area runs beyond Matthews into the surrounding south Charlotte communities. If you’re in Cotswold, Providence, SouthPark, or Stallings, we handle the same fireplace repairs there, with the same camera inspection and written estimate. Give us a call and we’ll confirm coverage and book a time that fits your schedule.
Serving Matthews, NC – Our Local Coverage Area
We serve Matthews and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Matthews
Yes, in a shared stack it can. If a neighbor’s gas logs or furnace vent into the same masonry flue, exhaust can back-draft into your fireplace, especially when your damper is open or the stack is misbalanced. We map the venting, confirm your fireplace is isolated, and fix the draft rather than just cleaning it. Call (888) 495-1677 for a free estimate. We answer 24/7.
It usually smokes because the flue is blocked or the damper is rusted open after a humid summer. A bird or squirrel nest in an uncapped flue is a common culprit, and so is a cracked crown letting moisture in. A Level 2 inspection finds the cause before we recommend a repair. Call (888) 495-1677 to book one. Estimates are free.
No, flaking mortar is usually not cosmetic. It’s the freeze-thaw cycle breaking down the joints, which lets water into the masonry and rusts the damper and erodes the smoke chamber. Left alone, it leads to spalling and a bigger repair. Have it looked at before winter. Call (888) 495-1677 for a free estimate. We answer 24/7.
We don’t recommend it, and it’s not just about the sweep. Sporadic burning leaves first-degree creosote that can glaze on one cold snap, and a DIY sweep won’t find a cracked crown, a blocked cap, or a shared-flue problem. The inspection is the point. Call (888) 495-1677 to schedule one. Fast dispatch from 7am to 7pm, Sunday through Friday.
Not always. A rusty damper can often be freed, repaired, or replaced on its own without touching the whole insert. We check the surround and venting first, since a worn gasket or loose flue connection matters more than the damper itself. Call (888) 495-1677 for a free estimate. We answer 24/7.
Ready to get your fireplace back in shape? Call (888) 495-1677 for a free estimate. We’ll inspect, show you the photos, and give you a written price before any work starts. Written by the team at Chimney Sweep Ballantyne.