Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Beverly Woods?
Chimney cleaning in Beverly Woods typically costs $180 to $350 for a standard sweep of a single flue, and most homes with one fireplace land near the middle of that range. Add an inspection and the number moves to roughly $250 to $500, depending on the level of inspection your chimney needs. Homes with two flues or heavier creosote buildup can run $400 to $650.
Those figures cover a real sweep: brushing the flue, removing the soot and creosote, and checking the firebox, damper, cap, and crown while we’re up there. Estimates are free, we answer 24/7 at (888) 495-1677, and fast dispatch runs 7am to 7pm, Sunday through Friday. The written estimate you get on-site sets the final price – the ranges here are typical for the Beverly Woods market, not a quote.
Key Takeaways
- A standard single-flue sweep in Beverly Woods runs $180 to $350.
- Pairing the sweep with an inspection usually costs $250 to $500.
- Two flues or heavy creosote can push the job to $400 to $650.
- Chimney caps and crowns are priced separately – most caps land between $150 and $450.
- Estimates are free, and the local pro is licensed and insured as their state requires.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the line items break down for a typical Beverly Woods chimney job in 2026. These are estimated ranges for this market; the written estimate sets the final price.
| Service | Typical Range | What’s Included |
|---|---|---|
| Standard chimney sweep (one flue) | $180 – $350 | Brush and clean the flue, clear soot and creosote, check damper and firebox |
| Sweep plus Level I inspection | $250 – $500 | Sweep plus a visual inspection of accessible chimney and firebox parts |
| Level II inspection (video scan) | $300 – $600 | Camera inspection of the flue interior, used when you buy or sell a home or after a chimney fire |
| Second flue sweep | $100 – $200 added | Cleaning a second flue in a two-fireplace or multi-flue chimney |
| Heavy creosote removal | $300 – $700 | Removal of glazed or heavily built-up creosote that a standard brush won’t clear |
| Chimney cap installation | $150 – $450 | Manufacturer-matched Gelco or Famco cap fitted to the flue |
| Crown repair or rebuild | $300 – $1,200 | Sealing cracks or rebuilding the crown that sheds water off the chimney top |
| Liner resurfacing (HeatShield) | $1,200 – $3,500 | Ceramic resurfacing that extends liner life without a full reliner |
What pushes a Beverly Woods cleaning toward the top of these ranges? The biggest driver is how much creosote has built up – a fireplace that gets used every cool evening in Winston-Salem’s winter picks up more than one that sees a fire on the occasional holiday. A second flue adds labor. Access matters too: a chimney on a steep roof or one tucked behind a low overhang takes longer to set up safely. And if the sweep turns up a cracked crown, a seized damper, or a liner that needs attention, that work is quoted on its own. We look while we clean, so the same visit that finds the problem can price the fix.
What Affects Chimney Cleaning Pricing in Beverly Woods
- Number of flues. A single chimney often serves more than one appliance. Each flue gets swept separately, so a two-flue home typically costs more than a one-flue home.
- Creosote level. Light, flaky creosote brushes out quickly. Glazed, tar-like creosote takes more time and specialized removal, which is where heavy-build pricing comes from. The type of wood you burn and how hot your fires run both matter here.
- Roof access. Beverly Woods has plenty of established homes with steeper rooflines and mature trees close to the chimney. Tree cover and roof pitch both affect how we set up, and that time is part of the job.
- Age and condition of the chimney. Older Beverly Woods homes – and this neighborhood has a fair share of them – often have clay tile liners, older dampers, or masonry that’s seen decades of freeze-and-thaw winters. The condition of the chimney, not just the cleaning, decides whether extra work is needed.
- Sweep plus inspection. A cleaning alone tells you the flue is clear. An inspection tells you whether it’s safe. Most homeowners bundle both, which is why the sweep-plus-inspection price is the one worth budgeting for.
- Caps, crowns, and liners. These are separate line items. A cap keeps rain and animals out; a crown keeps water off the masonry. When either is missing or failing, it’s quoted on top of the sweep.
That last point is why we treat the fireplace as a system. A chimney sweep is only as good as the inspection that comes with it. A clean flue with a cracked crown still lets water into the masonry, and a capped chimney with a rusted damper still won’t draft right. One call covers the sweep, inspection, repair, and cap – no juggling separate contractors for each piece.
How to Save on Chimney Cleaning
Chimney cleaning isn’t the place to chase the lowest bid, but there are real ways to keep the price fair without cutting corners on what your flue actually needs.
- Bundle the sweep and inspection. Booking them together usually costs less than scheduling each on its own, and you get a full picture of the chimney in one visit.
- Sweep on a regular rhythm. Once a year, or every time you’ve burned about a cord of wood, keeps creosote from reaching the glazed stage that’s expensive to remove.
- Burn dry, seasoned wood. Wet wood smolders and lays down more creosote. Dry wood burns hotter and leaves less behind, which is the cheapest creosote control there is.
- Deal with small problems early. A hairline crown crack is a small repair. Left through a few freeze-thaw winters, it becomes masonry damage that costs far more.
- Get a written estimate before work starts. The estimate is free, and it should itemize each task so you know exactly what you’re paying for and why.
- Ask what your chimney needs, not just what’s cheapest. A sweep that also handles repairs catches issues a one-task crew misses, which saves you a second visit and a second bill.
We use professional-grade materials for a reason: DuraFlex flexible stainless liner systems, HeatShield ceramic resurfacing, Gelco and Famco caps and crowns, Olympia Chimney and Copperfield components – the same brands professional chimney technicians across the country rely on, not the hardware-store substitutes. HeatShield liner restoration is a good example. It can add years to your flue without the cost or disruption of a full reliner, and it’s a service most general handymen simply can’t provide.
If you’d like a number for your own chimney, call (888) 495-1677 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm.
Repair or Replace? Where Cleaning Fits In
A cleaning won’t fix a failing liner, and a reliner won’t fix a chimney that’s simply blocked with soot. Knowing which stage your chimney is at keeps you from overpaying for the wrong job.
- A sweep clears soot and creosote so the flue drafts properly and stays clear of the buildup that fuels chimney fires.
- HeatShield liner resurfacing restores a liner that’s cracked or worn but still structurally sound – a middle path between a sweep and a full reliner.
- A full reliner with DuraFlex flexible stainless is the answer when the existing liner is beyond resurfacing or the flue has offset sections a rigid liner can’t follow.
- Structural repair covers the masonry, crown, or firebox when the shell of the chimney is the problem, not the flue interior.
We hand
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Shannon Padgett"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Wade Delaney"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Cole Fletcher